Vol. 2 No. 1: June 2025

					View Vol. 2 No. 1: June 2025

The articles within this issue are contributed by eight affiliated institutions/organizations from three countries: Bangladesh (Dhaka International University, Ahsanullah University of Science and Technology, United International University, Roads & Highway Department), Indonesia (Universitas Syiah Kuala, Universitas Iskandarmuda, and Malaysia (Politeknik Ungku Omar, Universiti Malaysia Pahang Al-Sultan Abdullah).

Published: 2025-02-18

Articles

  • Biochar as a Sustainable Cement Replacement for Enhancing Concrete Composite Properties: A Review

    Md. Saniul Haque Mahi, Md. Abdul Mun-Im-Dinar, Tanjun Ashravi Ridoy (Author)
    Pp. 1-10
    DOI: https://doi.org/10.70028/sgm.v2i1.24
  • Limestone Powder in Concrete Mixes: A Review of Mechanical Enhancements

    Md. Saniul Haque Mahi, Tanjun Ashravi Ridoy, Md. Faiag Ahmed Nibir, Mohummad Shopon Sheikh (Author)
    Pp. 11-21
    DOI: https://doi.org/10.70028/sgm.v2i1.25
  • Compressive Strength Behavior of Recycled Concrete with Fine Aggregate Replacement Using Rubber Crumb

    Abhijit Nath abhi, Md. Nafiuzzaman, Md Rafi Uzzaman, Abdul Awol Rabby, Md. Mosfiqur Rahman Rafid (Author)
    Pp. 22-34
    DOI: https://doi.org/10.70028/sgm.v2i1.36
  • A Comparative Analysis of Fly Ash Enhanced Micropiles in Sustainable Foundation Systems

    Rufaizal Che Mamat, Azuin Ramli, Abd Hakim Abd Aziz, Muhammad Daniel Hakim Azhari, Angelyna Jackson (Author)
    Pp. 35-46
    DOI: https://doi.org/10.70028/sgm.v2i1.35
  • Enhancing Pavement Performance and Economy through Crumb Rubber Modified Bitumen: A Sustainable Engineering Approach

    A.F.S. Ahad Rahman Khan, Nafisa Tabassum (Author)
    Pp. 47-61
    DOI: https://doi.org/10.70028/sgm.v2i1.39
  • Influence of Flakiness and Elongation Index Compliance on Marshall Parameters in Asphalt Mixtures

    Siti Mira Maulida, Ucha Arief Pratama, Rafiqa Muhnita Yusputri, Aulia Rahmad, Aqlima Putri, Yusria Darma, Sofyan M Saleh (Author)
    Pp. 62-70
    DOI: https://doi.org/10.70028/sgm.v2i1.41
  • Advancing Sustainable Materials and Technologies

    Ramadhansyah Putra Jaya, Reza Pahlevi Munirwan, Bunyamin Bunyamin (Author)
    Pp. 71-73
    DOI: https://doi.org/10.70028/sgm.v2i1.49