Innovative Sustainable Concrete: Fresh and Hardened Properties Incorporating Plastic Waste
DOI:
https://doi.org/10.70028/cpir.v1i1.26Keywords:
Plastic Waste, Non-Degradable Materials, Cement Replacement, Strength, ConcreteAbstract
Plastic waste generation has become a global environmental crisis that requires immediate, innovative, and sustainable solutioning. Concrete, being one of the most consumed construction materials, may provide a viable route for recycling plastic waste in accordance with the principles of the circular economy. However, the incorporation of plastic into concrete is a big challenge due to its hydrophobic nature and poor interfacial adhesion, which can compromise mechanical properties. This study was investigate the effects of the inclusion of plastic waste on some mechanical and durability properties of concrete. The review has pointed out some critical gaps in the existing literature, such as the lack of comprehensive studies focusing on the optimization of plastic content without compromising structural integrity. A systematic experimental approach was followed wherein plastic waste in various forms, for instance, PET, PP, was used at variable percentage incorporation, and the concrete derived was tested for compressive strength, tensile strength, flexural strength, and durability parameters. The results indicate that while the plastic incorporation increases the ductility and decreases the density of concrete, there is a loss in strength parameters. The novelty of this study is to propose strategies to overcome these drawbacks by surface treatment of plastic particles and optimal mix design. This research underlines the potential of plastic-reinforced concrete as an environmentally sustainable material, offering a dual solution for waste management and resource conservation.
Downloads
References
R. Geyer, J. R. Jambeck, and K. L. Law, “Production, use, and fate of all plastics ever made,” 2017. [Online]. Available: http://advances.sciencemag.org/
M. Manchala and B. V. Ramana, “Beat the Plastic Pollution,” Int. J. Environ. Plan. Dev., vol. 6, no. 2, pp. 1–6, 2020.
J. Gertsakis and H. Lewis, “Sustainability and the Waste Management Hierarchy,” 2003.
P. P. Sambhaji, “Use of waste plastic in concrete mixture as aggregate replacement,” Int. J. Adv. Eng. Res. Sci., vol. 3, no. 12, p. 236956, 2016.
R. Siddique, J. Khatib, and I. Kaur, “Use of recycled plastic in concrete: A review,” Waste Manag., vol. 28, no. 10, pp. 1835–1852, 2008, doi: http://dx.doi.org/10.1016/j.wasman.2007.09.011
C. Albano, N. Camacho, M. Hernández, A. Matheus, and A. Gutiérrez, “Influence of content and particle size of waste PET bottles on concrete behavior at different w/c ratios,” Waste Manag., vol. 29, no. 10, pp. 2707–2716, Oct. 2009, doi: http://dx.doi.org/10.1016/j.wasman.2009.05.007
Y. Senhadji, G. Escadeillas, A. S. Benosman, M. Mouli, H. Khelafi, and S. Ould Kaci, “Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete,” J. Adhes. Sci. Technol., vol. 29, no. 7, pp. 625–640, Apr. 2015, doi: http://dx.doi.org/10.1080/01694243.2014.1000773
N. Saikia and J. De Brito, “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate,” Constr. Build. Mater., vol. 52, pp. 236–244, 2014, doi: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.049
A. Gavhane, P. Patil, S. Soni, and D. Sutar, “Utilisation of e-plastic waste in concrete,” Int. J. Eng. Res. Technol., vol. 5, no. 2, pp. 594–601, 2016.
A. Sadrmomtazi, S. Dolati-Milehsara, O. Lotfi-Omran, and A. Sadeghi-Nik, “The combined effects of waste Polyethylene Terephthalate (PET) particles and pozzolanic materials on the properties of self-compacting concrete,” J. Clean. Prod., vol. 112, pp. 2363–2373, 2016, doi: http://dx.doi.org/10.1016/j.jclepro.2015.09.107
S. Yang, X. Yue, X. Liu, and Y. Tong, “Properties of self-compacting lightweight concrete containing recycled plastic particles,” Constr. Build. Mater., vol. 84, pp. 444–453, Jun. 2015, doi: http://dx.doi.org/10.1016/j.conbuildmat.2015.03.038
M. Sabău and J. R. Vargas, “Use of e-plastic waste in concrete as a partial replacement of coarse mineral aggregate,” Comput. Concr., vol. 21, no. 4, pp. 377–384, 2018.
A. M. Hameed and B. A. F. Ahmed, “Employment the plastic waste to produce the light weight concrete,” Energy Procedia, vol. 157, pp. 30–38, 2019, doi: http://dx.doi.org/10.1016/j.egypro.2018.11.160
Z. Bayasi and J. Zeng, “Properties of Polypropylene Fiber Reinforced Concrete,” ACI Mater. J., vol. 90, no. 6, 1993.
J. P. Parviz Soroushian and S. Ravanbakhsh, “Assessment of Reinforcing Effects of Recycled Plastic and Paper in Concrete,” ACI Mater. J., vol. 100, no. 3, doi: http://dx.doi.org/10.14359/12620
P. K. Mehta, “Concrete. Structure, properties and materials,” 1986.
R. Siddique, J. Khatib, and I. Kaur, “Use of recycled plastic in concrete: A review,” Waste Manag., vol. 28, no. 10, pp. 1835–1852, 2008, doi: http://dx.doi.org/10.1016/j.wasman.2007.09.011
M. Frigione, “Recycling of PET bottles as fine aggregate in concrete,” Waste Manag., vol. 30, pp. 1101–1106, 2010, doi: http://dx.doi.org/10.1016/j.wasman.2010.01.030
Z. Z. Ismail and E. A. Al-Hashmi, “Use of waste plastic in concrete mixture as aggregate replacement,” Waste Manag., vol. 28, pp. 2041–2047, 2007, doi: http://dx.doi.org/10.1016/j.wasman.2007.08.023
N. Saikia and J. De Brito, “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate,” Constr. Build. Mater., vol. 52, pp. 236–244, 2014, doi: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.049
A. M. Azhdarpour, M. R. Nikoudel, and M. Taheri, “The effect of using polyethylene terephthalate particles on physical and strength-related properties of concrete: A laboratory evaluation,” Constr. Build. Mater., vol. 109, pp. 55–62, 2016, doi: http://dx.doi.org/10.1016/j.conbuildmat.2016.01.056
J. L. Ruiz-Herrero et al., “Mechanical and thermal performance of concrete and mortar cellular materials containing plastic waste,” Constr. Build. Mater., vol. 104, pp. 298–310, 2016, doi: http://dx.doi.org/10.1016/j.conbuildmat.2015.12.005
C. Aciu, D.-A. Ilutiu-Varvara, D.-L. Manea, Y.-A. Orban, and F. Babota, “Recycling of plastic waste materials in the composition of ecological mortars,” Procedia Manuf., vol. 22, pp. 274–279, 2018, doi: http://dx.doi.org/10.1016/j.promfg.2018.03.042
K. Hannawi, W. Prince, and S. Kamali-Bernard, “Effect of thermoplastic aggregates incorporation on physical, mechanical and transfer behaviour of cementitious materials,” Waste Biomass Valorization, vol. 1, pp. 251–259, 2010, doi: http://dx.doi.org/10.1007/s12649-010-9021-y
M. Hameed and B. A. Ahmed, “Employment the plastic waste to produce the light weight concrete,” Energy Procedia, vol. 157, pp. 30–38, 2019, doi: http://dx.doi.org/10.1016/j.egypro.2018.11.160
N. Saikia and J. De Brito, “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate,” Constr. Build. Mater., vol. 52, pp. 236–244, 2014, doi: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.049
A. A. Mohammed, I. I. Mohammed, and S. A. Mohammed, “Some properties of concrete with plastic aggregate derived from shredded PVC sheets,” Constr. Build. Mater., 2019
A. M. Azhdarpour, M. R. Nikoudel, and M. Taheri, “The effect of using polyethylene terephthalate particles on physical and strength-related properties of concrete: A laboratory evaluation,” Constr. Build. Mater., vol. 109, pp. 55–62, 2016, doi: http://dx.doi.org/10.1016/j.conbuildmat.2016.01.056
M. B. T. Ashwini, “Partial replacement of E-plastic Waste as Coarse-aggregate in concrete,” Procedia Environ. Sci., vol. 35, pp. 731–739, 2016, doi: http://dx.doi.org/10.1016/j.proenv.2016.07.079
F. K. Alqahtani, G. Ghataora, S. Dirar, M. I. Khan, I. Zafar, and M. Alhassan, “Experimental study to investigate the engineering and durability performance of concrete using synthetic aggregates,” Constr. Build. Mater., vol. 173, pp. 350–358, 2018, doi: http://dx.doi.org/10.1016/j.conbuildmat.2018.04.018
M. Gesoglu, E. Guneyisi, O. Hansu, S. Etli, and M. Alhassan, “Mechanical and fracture characteristics of self-compacting concretes containing different percentages of plastic waste powder,” Constr. Build. Mater., vol. 140, pp. 562–569, 2017, doi: http://dx.doi.org/10.1016/j.conbuildmat.2017.02.139
M. Frigione, “Recycling of PET bottles as fine aggregate in concrete,” Waste Manag., vol. 30, pp. 1101–1106, 2010, doi: http://dx.doi.org/10.1016/j.wasman.2010.01.030
Z. Z. Ismail and E. A. Al-Hashmi, “Use of waste plastic in concrete mixture as aggregate replacement,” Waste Manag., vol. 28, pp. 2041–2047, 2007, doi: http://dx.doi.org/10.1016/j.wasman.2007.08.023
N. Saikia and J. De Brito, “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate,” Constr. Build. Mater., vol. 52, pp. 236–244, 2014, doi: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.049
A. C. Bhogayata and N. K. Arora, “Fresh and strength properties of concrete reinforced with metalized plastic waste fibers,” Constr. Build. Mater., vol. 146, pp. 455–463, 2017, doi: http://dx.doi.org/10.1016/j.conbuildmat.2017.04.095
L. I. Diaconu, P. Diana, M. Rujanu, and L. Groll, “Clay-ecological natural binder,” Procedia Eng., vol. 181, pp. 391–395, 2017, doi: http://dx.doi.org/10.1016/j.proeng.2017.02.406
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Md. Saniul Haque Mahi, Tanjun Ashravi Ridoy, Fatima Antara Islam Mounata, Meheron Khan (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
